1 Fase | 32 ampère (3 articles)
Prev[1]Next
Show: List Sort by:
IN632128 EV Charging cable | Type 2 | 1 Phase | 32a | 4-8m <b>JAZZY2GO Mode 3 charging cable in 8 meters.
Type 2, i.e. a 7-pin plug on the car side and a 7-pin plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and have ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b>Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> PUR
<b>Cable:</b> 3 x 6.0mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 		 	 	 	 	
<b>Max. Height capacity: </b> 7,4kW. Charging cable up to 32A / 250V	 	 	 	 	 
<b>Number of phases:</b> 1	 	 	 	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	 	
<b>Resistance:</b> 220 Ohm


This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN632128C EV Charging cable | Type 2 | 1 Phase | 32a | 4-8m <b>JAZZY2GO Mode 3 charging cable in spiral shape 4 to 8 meters.
Type 2, i.e. a 7-pin plug on the car side and a 7-pin plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and have ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b>Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> PUR
<b>Cable:</b> 3 x 6.0mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 		 	 	 	 	
<b>Max. Height capacity: </b> 7,4kW. Charging cable up to 32A / 250V	 	 	 	 	 
<b>Number of phases:</b> 1	 	 	 	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	 	
<b>Resistance:</b> 220 Ohm


This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
IN632125 EV Charging cable | Type 2 | 1 Phase | 32a | 5m <b>JAZZY2GO Mode 3 charging cable in 5 meters.
Type 2, i.e. a 7-pin plug on the car side and a 7-pin plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and have ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b>Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> PUR
<b>Cable:</b> 3 x 6.0mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 		 	 	 	 	
<b>Max. Height capacity: </b> 7,4kW. Charging cable up to 32A / 250V	 	 	 	 	 
<b>Number of phases:</b> 1	 	 	 	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	 	
<b>Resistance:</b> 220 Ohm

 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
Charging Stations (EVs) to Mode 3 Charging Stations in Accordance
with the standard ISO 17409 and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
 
Prev[1]Next