1 Fase | 16 ampère (3 articles)
Prev[1]Next
Show: List Sort by:
IN616128C EV Câble de charge | Type 2 | 1 phase | 16a | 4-8m <b>JAZZY2GO Mode 3 charging cable in spiral shape 4 to 8 meters.
Type 2, i.e. a 7-pole plug on the car side and a 7-pole plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and has ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b> Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> PUR
<b>Cable:</b> 3 x 2.5mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 	
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 	 	 	 	
<b>Max. Height capacity: </b> 3,7kW. Charging cable up to 20A / 250V
<b>Number of phases:</b> 1	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	
<b>Resistance:</b> 680 Ohm

This JAZZY2GO charging cable is supplied in a strong synthetic carrying case, together with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is included in the carrying case. Read the instructions carefully before use.

JAZZY2GO charging cables may only be used to charge electric cars (EVs) according to Mode 3 charging stations
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
IN616125 EV Charging cable | Type 2 | 1 Phase | 16a | 5m <b>JAZZY2GO Mode 3 charging cable in spiral shape 4 to 8 meters.
Type 2, i.e. a 7-pole plug on the car side and a 7-pole plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and has ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b> Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> TPE
<b>Cable:</b> 3 x 2.5mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 	
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 	 	 	 	
<b>Max. Height capacity: </b> 3,7kW. Charging cable up to 20A / 250V
<b>Number of phases:</b> 1	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	
<b>Resistance:</b> 680 Ohm


This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN616128 EV Charging cable | Type 2 | 1 Phase | 16a | 8m <b>JAZZY2GO Mode 3 charging cable in 4 meters.
Type 2, i.e. a 7-pole plug on the car side and a 7-pole plug at the charging station.</b>

The 7-pole plug is filled with a heat-distributing synthetic resin and has ergonomically shaped handles.
The plugs have a rubber cap to protect against dirt and moisture.

<b> Characteristics</b>
 	 	 	 	 	 	 	 	 	 	 	 
<b>Cable type:</b> PUR
<b>Cable:</b> 3 x 2.5mm² (L1, Mass + N) and 1 x 0.5mm² (CP)	 	
<b>Class:</b> V-O, non-flammable top class 	 	 	 	 	 
<b>Plugs:</b>In accordance with IEC 62196-2 and 61962-2	 	 	 	 	
<b>Max. Height capacity: </b> 3,7kW. Charging cable up to 20A / 250V
<b>Number of phases:</b> 1	 	 	 	 	 	 
<b>Safety class: </b> IP44	 	 	 	 	 	 	
<b>Resistance:</b> 680 Ohm
 
Ce câble de charge JAZZY2GO est livré dans un solide sac de transport en plastique, avec deux gants en microfibre
pour nettoyer et sécher le câble et la (les) fiche (s) après utilisation.
Un manuel est fourni dans le sac de transport. Veuillez lire attentivement les instructions avant utilisation.
 
Les câbles de charge JAZZY2GO ne doivent être utilisés que pour recharger des voitures électriques (VE) aux stations de recharge de mode 3 conformément
avec la norme ISO 17409 et la norme CEI 61851. N'utilisez jamais de rallonge avec un câble de charge! IN616125
(min. 1)
 
Prev[1]Next