Type 1 (6 articles)
Prev[1]Next
Show: List Sort by:
IN616115 EV cable car plug type 1 - station plug - 5.00m - mode3 - 16a - 1phase JAZZY2GO charging cable with a Type 1 plug on the car side and a Type 2 plug (male) at the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped handgrip. 	 
The plugs are fitted with a rubber cap to protect against dirt and moisture.	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 
Characteristics	 	 	 	 	 	 	 	 	 
Type of cable 	 	TPE 	 	 	 	 	 	 	 
Cable	 	 	3 x 2,5mm2 (L1, Mass + N) and 1 x 0,5mm2 (CP)	 	 	 
 	 	 	Class V-O, non-flammable highest class	 	 	 	 
Plugs	 	 	In accordance with IEC 62196-1 and 62196-2	 	 	 	 
Max. capacity	 	3,7kW. Charging cable up to 20A / 250V  (20A max.)	 	 
Number of phases 	 	1	 	 	 	 	 	 	 
Safety class 	 	IP 44	 	 	 	 	 	 	 
Resistance	 	680 Ohm	 	 	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two 	 	 
microfiber gloves for cleaning and drying the cable and plug(s) after use.	 	 	 	 
A manual is provided in the carrier bag. Please read the instructions carefully before use.	 	 
 	 	 	 	 	 	 	 	 	 	 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations	 
in accordance with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a 	 
charging cable!	 	  IN616115
(min. 1)
IN616118 EV cable car plug type 1 - station plug - 8.00m - mode3 - 16a - 1phase JAZZY2GO charging cable with a type 1 plug on the side of the car and a plug type 2 (male) at the charging station.
The Type 2 plug is filled with a synthetic heat-dissipating resin and has an ergonomically shaped handle.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
TPE cable type
Cable 3 x 2,5mm2 (L1, Mass + N) and 1 x 0,5mm2 (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-1 and 62196-2
Max. 3.7kW capacity. Charging cable up to 20A / 250V (20A max.)
Number of phases 1
IP Security Class 44
Resistance 680 Ohm

This JAZZY2GO charging cable comes in a sturdy synthetic carrying bag, with two
Microfibre gloves for cleaning and drying the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations
in accordance with ISO 17409 and IEC 61851. Never use an extension cord with
charging cable! IN616115
(min. 1)
IN616118C EV coil cable car plug type1 – station plug – 8.00m – mode 16a – 1phase JAZZY2GO coil charging cable with a Type 1 plug on the car side and a Type 2 plug at the charging station.	 	The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped handgrip.	 	 	The plugs are fitted with a rubber cap to protect against dirt and moisture.	 	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 	 	Characteristics	 	 	 	 	 	 	 	 	 	 	 	 
Type of cable 	 	PUR	 	 	 	 	 	 	 	 	 	 Cable	 	 	3 x 2,5mm² (L1, Mass + N) and 1 x 0,5mm² (CP)	 	 	 	 	 	                                                Class V-O, non-flammable highest class 	 
	 	 	 	 	 
Plugs	 	 	In accordance with IEC 62196-2 and 61962-2	 	 	 	 	 	 
Max. capacity	 	3,7kW. Charging cable up to 20A / 250V 
	 	 	 	 	 
Number of phases 	 	1	 	 	 	 	 	 	 	 	 	 
Safety class 	 	IP44	 	 	 	 	 	 	 	 	 	 
Resistance	 	680 Ohm	 	 	 	 	 	 	 	 	 	 
 	 	 	 	 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves	 	 	 	 
for cleaning and drying the cable and plug(s) after use. 	 	 	 	 	 	 	 	 
A manual is provided in the carrier bag. Please read the instructions carefully before use.	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 	 	 	 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance	 	 
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! 616118C
(min. 1)
IN632115 EV cable car plug type 1 – station plug 5.00m mode3 32a 1phase JAZZY2GO charging cable with a type 1 plug on the side of the car and a type 2 plug from the charging station.
The Type 2 plug is filled with a synthetic heat-dissipating resin and has an ergonomically shaped handle.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
TPE cable type
Cable 3 x 6.0mm² (L1, Ground + N) and 1 x 0.5mm² (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-2 and 61962-2
Max. 7.4kW capacity. Charging cable up to 32A / 250V
Number of phases 1
Security class IP44
220 Ohm resistance

This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616115
(min. 1)
IN632118 EV cable car plug type 1 – station plug  8.00mm mode3 32a 1phase JAZZY2GO charging cable with a Type 1 plug on the car side and a Type 2 plug on the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped hand grip.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 3 x 6.0 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 7.4kW. Charging cable up to 32A / 250V
Number of phases 1
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! in616118
(min. 1)
IN632118C EV coil cable car plug type 1- station plug 8.00m mode 32a 1phase JAZZY2GO coil charging cable with a Type 1 plug on the car side and a Type 2 plug at the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped hand grip.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable PUR
Cable 3 x 6.0 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 7.4kW. Charging cable up to 32A / 250V
Number of phases 1
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! 616118C
(min. 1)
  
Prev[1]Next