Chargers and boosters (151 articles)
Prev[1]23Next
Show: List Sort by:
252003 AccuMate - 6-12V - 1,2A  252003
252003
TM-06SAE
(min. 1)
252005 AccuMate Pro 12V-7A / 24V-3,5A  252005
(min. 1)
252004 AccuMate Pro/G - 12V - 4A  252004
(min. 1)
CE845122-A Accu-Smart - 12V - 2A  CE845122-A
CE845122-A
845122-A
(min. 1)
CE845127-A Accu-Smart - 12V - 7A  CE845127-A
CE845127-A
845127-A
(min. 1)
CE845120-A Accu-Smart 12V 10A Accu-Smart 12V 10A CE845122-A
CE845120-A
845120-A
(min. 1)
252-016 Adapter - AUTO contact to BIKE plug Adapter - AUTO contact to BIKE plug

Connect your standard USB or GPS charge adapters to a BIKE/DIN socket found on BMW, Triumph, Victory, selected Honda Gold Wing motorcycles and John Deere ATVs.

Ø21mm auto socket with internal slots lock inserted adapter/connector in place.
Power is delivered through a Ø12mm BIKE/DIN plug. Includes cap to protect plug tip.
Length=12?/30cm
-20°C/-4°F low temperature use

Premium cable designed by TecMate. 3-year limited warranty. OptiMate016a
(min. 1)
252-007 Adapter - charging cable - KET to SAE Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap.

Length=6?/15cm
KET 2 pole connector with locking clip converts to an industry standard 2-pin SAE connector
Cable max. rating: 5 Amp
-40°C/-40°F very low temperature use OptiMate07-a
(min. 1)
252-017 Adapter - charging cable - KET to SAE Convert your older TecMate charger or British charger brand to connect to the OptiMATE (or other SAE) permanent battery lead.

Length=6?/15cm
KET/TM/british 2 pin connector converts to an industry standard SAE 2-pin connector
Cable max. rating: 5 Amp
-40°C/-40°F very low temperature use OptiMate17-a
(min. 1)
252005CIG Adapter - Cigar lighter to KET Adapter - Cigar lighter to KET - 90cm - TM-68 252005CIG
(min. 1)
252-057 Adapter - MV Agusta to SAE Adapter - MV Agusta to SAE

Converts the MV Agusta specific underseat battery charge connector (found on recent models) to an industry standard SAE 2-pole connector.

Length=12?/30cm
MV Agusta >2010 connector
Industry standard 2-pin SAE connector
15A fuse
Cable max. rating: 5 Amp
-40°C/-40°F very low temperature use; cable remains flexible at ‘below freezing’ temperatures.

Includes sealing cap for OptiMate heavy duty SAE connector. Premium cable designed by TecMate. 3-year limited warranty. OptiMate057a
(min. 1)
252-002 Adapter - SAE to auto/bike plug Plug with twist off adapter, fits Ø12mm BIKE/DIN or Ø21mm AUTO sockets, power delivered through an industry standard 2-pole SAE connector.

Length=20?/50cm
Industry standard SAE 2-pin connector
8A fuse (inside connector)
Cable max. rating: 5 Amp
-20°C/-4°F low temperature use OptiMate02-a
(min. 1)
252-019 Adapter - SAE to plug MOTO 90° Adapter - SAE to plug MOTO 90°

Connect your battery charger or your tankbag fitted with O-30 adapter, to a Ø12mm DIN power socket found on BMW, Triumph, Victory, selected Honda Gold Wing motorcycles and John Deere ATVs.

Length=6?/15cm
Low profile DIN / BIKE 90° connector *
Industry standard 2-pin SAE connector
15A fuse,
Cable max. rating: 5 Amp
-40°C/-40°F very low temperature use; cable remains flexible in ‘below freezing’ temperatures.

 Includes in-line rubber seal for OptiMATE heavy duty SAE connector. Premium cable designed by TecMate. 3-year limited warranty. * Low profile BIKE 90° plug replaces straight 180° plug. OptiMate019a
(min. 1)
252-020 Adapter - weather resistant SAE cable front panel mounting Adapter - weather resistant SAE cable front panel mounting 252-020
(min. 1)
252-029 Adapter extender - SAE to BIKE 90° plug Adapter extender - SAE to BIKE 90° plug

Connect your on vehicle electronics or your tankbag fitted with O-30 adapter, to a side mounted Ø12mm DIN power socket on BMW, Triumph, Victory, Honda GW.

Length=40?/100cm
Sealed low profile DIN (12mm diameter) connector
Industry standard 2-pin SAE connector
15A fuse
Cable max. rating: 5 Amp
-40°C/-40°F very low temperature use; remains flexible at ‘below freezing’ temperatures.

Includes in-line rubber seal for OptiMATE heavy duty SAE connector. Premium cable product designed by TecMate. 3-year limited warranty OptiMate029a
(min. 1)
252-067 Adapter kit - 3 pieces - SAE to DC2.5 Adapter kit - 3 pieces - SAE to DC2.5

Length each : 12? / 30cm
Industry standard 2-pin SAE connector, with in-line seal.
DC co-axial Ø5.5×2.5mm plug and socket, with in-line seals.
Cable max. rating: 10 Amp
-40°C/-40°F very low temperature use; remains flexible at ‘below freezing’ temperatures. OptiMate67-a
(min. 1)
252-037 Adapter-cable - SAE to OBDII Adapter-cable - SAE to OBDII

Length=40?/100cm
Industry standard SAE 2-pin connector
15A fuse
Cable max. rating: 10 Amp
-40°C/-40°F very low temperature use; cable remains flexible at ‘below freezing’ temperatures. OptiMate37-a
(min. 1)
252-009 Adapter-Extension cable - SAE to Bike - contact 180° Charger lead  & extender fits Ø12mm DIN power socket on BMW, Triumph, Victory & selected Honda Gold Wing motorcycles and John Deere ATVs.

Length=48?/120cm,
Industry standard 2-pin SAE connector
Std Ø12mm DIN plug.
Cable max. rating: 5 Amp,
-40°C/-40°F very low temperature use; cable remains flexible in ‘below freezing’ temperatures. OptiMate09-a
(min. 1)
252109 Automatic charger - 12V - 1.5/10A automatische lader 12v/1.5-10a


Input: 230V  AC~50Hz
Output: 1.5 / 10A 12V
Battery Charge Range Capacity ( 1.5 MODE ): 2.3AH - 30AH  
Battery Charge Range Capacity ( 10 MODE ): 30AH - 200AH  
Battery Charge Range CCA: 10CCA - 1000CCA 
Minimum Start Voltage: 2V
Dimensions: 210 mm x 98 mm x 60 mm
Weight: 0.88 kg
Battery technology select function ( AGM , AGM SPIRAL , AGM , SLI , EFB , CALCIUM , VRLA , GEL BATTERIES ,  LITHIUM INCLUDING LIFEPO4 )
Reverse polarity protection
Over Temperature protection
Short Circuit Protection
Spark Free Protection
Ingress Protection rating: IP65 252109
(min. 1)
252106 Automatic Charger - 12V/5A - Autoexact automatic charger 12v/5a auto precise
Fully automatic high-frequency charger and maintenance charger
 
Microprocessor controlled 5 phase charger 12v/5a
charge discharged batteries from 2 Volt

Suitable for batteries from 6 to 80A.

application: SLI/VRLSA/GEL/AGM/CAL,CAL START-STOP& Spiral.
 
LED charging indications, reverse polarity protected, spark free, peak voltage protected.

Supplied in a box with a set of connecting pliers and a set of connecting eyes.

sizes: 170x73x48 mm

 252106
(min. 1)
252101 Automatic chrager - 12v - 1,5a  252101
(min. 1)
252-11 Battery cable - weatherproof - heavy applications Battery cable - weatherproof - heavy applications

Length=20?/50cm
5/16? / M8 ringlets
Industry standard 2-pole SAE connector
15A fuse
cable max. rating: 10 Amp
-40°C/-40°F very low temperature use; cable remains flexible in ‘below freezing’ temperatures. OptiMate11 - a
(min. 1)
252-123 Battery level indicator - SAE - std/wet cell Battery level indicator - SAE - std/wet cell 252-123.jpg
(min. 1)
255040 Battery separator - BS 140 Dual - 12/24V - 140A  255040
(min. 1)
252-126 Battery status/charging system monitor for 12V lead-acid - with AUTO plug Battery status/charging system monitor for 12V lead-acid - with AUTO plug

Monitor charge of any 12V lead-acid battery or confirm if vehicle charging system is working correctly. For any Ø21mm AUTO socket.

Length = 10”/25cm
10A fuse (inside connector)
2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode).
4 LEDs cover ‘full to empty’ voltage range of all 12V batteries, including higher voltage AGM for power sport (4th vvLED = 12.7V ).
Battery charge level : LED matching charge level blinks every 5 seconds (long term draw less than 0.2 micro Amps).
Fast blink mode for first 15 seconds after connection to battery, ideal for testing multiple batteries (e.g. vehicles on showroom floor).
Vehicle Charge system : LED arrow mode activates when charge voltage reaches minimum 13.5V (vgreen LED) or ideal range of 14V+ (vv green LED).

Premium battery monitor designed by TecMate. 3-year limited warranty. OptiMate126a
(min. 1)
150017 Battery tester - digital - printer Battery tester with printer digital

model BT2000 (150017)

application: 6 + 12V batteries
12V start-stop batteries
12 +24V load/start system test

Operating range: 40-3000 CCA (SAE)

Measure standards: SAE, DIN, AND, IEC, JIS, ( BATTERY NO.)

Voltmeter: 1.5V - 30V via battery terminals 60V via test cables
Display: Blue, black letters, 4 lines, 16 characters,
Display brightness adjustable

Thermal printer integrated.

Cable length: 180 cm

languages: English, French, Spanish, German

Particulars: Easy link communication with PC via USB
Date/Time / Storage 1000 tests.
Print personalized
temperature sensor/ compensation

including: roll of print paper/ test cables/ 6 AA batteries
Storage Case

Dimensions L.275xWr.135xH.80(mm) BT2000
(min. 1)
252015 Battery tester - OptiMate - 12V Connect clips to the battery and read the result. The OptiMate battery tester’s microprocessor draws very low power from the battery itself to determine and display battery status.
Tests all 12V Lead-acid and 12.8V / 13.2V LiFePO4 (LFP) Lithium batteries and displays result that can be used to convey information to customer.

- State of charge result in VOLTS and %, 3 different bands for STD, AGM/GEL and LiFePO4 4 series batteries.
- Easy to follow instructions on rear panel of the tester.
- Industry standard SAE 2-pin connector.
- 40? / 100cm battery clip set.
- Flashing indicator for discharged battery. 252015
(min. 1)
150023 Battery tester - profi  Batterijtester profi
150023
WT-BT101
(min. 1)
150016 Battery-charge-start analyzer - digital Battery charge-start analyzer digital BT 282

model: BT 282 (150016)
	
Application: 12V batteries 12V charge/start system test
	     12V start/stop batteries test
	     12V load/start system test

Operating range: 40- 1200 CCA (SAE)

measuring standards : SAE, DIN, EN, IEC, CA/MCA (BATTERY NR.)

Voltmeter: 4,5V - 16V

Display : Graphic LCD blue / black text

Cable length: 50 cm
languages: English

Accessories and details: internal resistance analysis. Compact design. 
	                                      no internal battery.
Dimensions L.120xW.79xH.22,7(mm) BT282
(min. 1)
252-014 Batteryclamps - fused Batteryclamps - fused

Battery clips with 15A fuse, with ‘easy grip’ rubber handles, custom designed to fit round, square (power sport) and flat tab posts.

Length=20?/50cm
Industry standard SAE 2-pin connector
15A fuse.
Cable max. rating: 10 Amp
-40°C/-40°F low temperature use

Includes in-line rubber seal for  OptiMATE heavy duty SAE connector. Premium cable designed by TecMate. 3-year limited warranty. OptiMate014a
252-014
O-14
(min. 1)
253171 Booster SC 3230B 1Ph 230/50-60 Out. 6-12-24V - Schuko plug Professional microprocessor-controlled battery charger and starter.
Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca and traction batteries DEEP CYCLE.
"Safe Charge & Boost"
The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 40839 interference emission level I)
Furthermore, the voltage thresholds for the charging steps may be modified in order to adapt them to special batteries. (eg: Optima, MaXXima).
This battery charger helps you to check that the battery voltage selected is the right one, and if a short circuit or a reverse polarity occurs.
4 Multi step charging programs
The lead batteries WET, AGM, GEL, Ca/Ca and traction "Deep cycle", are charged by applying sophisticated multi-step programs: (IU0U; IUI0U; IU).
- Charging
- Equalization
- Maintenance ("Floating")
- Desulphation
Continuously adjustable charge current
Lets you charge optimally batteries of all capacities (Ah).
"Booster" function
for start assist
Temperature sensor
Automatically compensates any charging voltage according to ambient temperature.
Battery check
The battery charger checks if the battery is sulphated and if it can store the charge.
"Memory"
The function makes this product easy to use: Just connect the battery charger to a battery and to the mains and charging begins following the last programme set.
"Back-up"
The function powers the vehicle electronics while the battery is being replaced and so saved data are not lost (radio and seat settings, for instance).

Features
Input Voltage (Volt 50-60Hz AC):	1 Ph x 230
Nominal battery voltage (Volt):	6 - 12 - 24
Power (KW):                                     	0,8 - 7
Voltage limitation (Volt):                         	Regolabile - Adjustable
Average charging current (Amp):	30
Charging programs:                     	4
Battery capacity (Ah min/max):	5 - 600
Battery types:                                 	Pb: WET MF, GEL, AGM, Ca-Ca, Traction / Deep Cycle
Effective charging current (Amp.MAX):	45
Charging positions (N°):                   	STEPLESS
Boosting Current (Amp 0 Volt CC):	250
Boosting current (Amp 1 Volt / EL):	230 253171
(min. 1)
253170 Booster SC 3300B 1Ph 230/50-60 Out. 6-12-24V - Schuko plug Professional microprocessor-controlled battery charger and starter.
Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca and traction batteries DEEP CYCLE.
"Safe Charge & Boost"
The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 40839 interference emission level I)
Furthermore, the voltage thresholds for the charging steps may be modified in order to adapt them to special batteries. (eg: Optima, MaXXima).
This battery charger helps you to check that the battery voltage selected is the right one, and if a short circuit or a reverse polarity occurs.
4 Multi step charging programs
The lead batteries WET, AGM, GEL, Ca/Ca and traction "Deep cycle", are charged by applying sophisticated multi-step programs: (IU0U; IUI0U; IU).
- Charging
- Equalization
- Maintenance ("Floating")
- Desulphation
Continuously adjustable charge current
Lets you charge optimally batteries of all capacities (Ah).
"Booster" function
for start assist
Temperature sensor
Automatically compensates any charging voltage according to ambient temperature.
Battery check
The battery charger checks if the battery is sulphated and if it can store the charge.
"Memory"
The function makes this product easy to use: Just connect the battery charger to a battery and to the mains and charging begins following the last programme set.
"Back-up"
The function powers the vehicle electronics while the battery is being replaced and so saved data are not lost (radio and seat settings, for instance).

Features
Input Voltage (Volt 50-60Hz AC):	1 Ph x 230
Nominal battery voltage (Volt):	6 - 12 - 24
Power (KW):                                	1,2 - 10
Voltage limitation (Volt):                 	Regolabile - Adjustable
Average charging current (Amp):	40
Charging programs:                      	4
Battery capacity (Ah min/max):	5 - 800
Battery types:                                 	Pb: WET MF, GEL, AGM, Ca-Ca, Traction / Deep Cycle
Effective charging current (Amp.MAX):	60
Charging positions (N°):                	STEPLESS
Boosting Current (Amp 0 Volt CC):	350
Boosting current (Amp 1 Volt / EL):	300 253170
(min. 1)
253165 Booster SC 60/700 1Ph 230/50-60 Out. 12-24V - Schuko plug Professional microprocessor-controlled battery charger and starter.
Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
"Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
Multi step charging- The batteries are charged by applying sophisticated multi-step programs.
Floating - Can remain connected to the battery for a long time. Batteries are ready to use at all times.
Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
Charging with timer
Boosting remote control
Digital Voltmeter / Ammeter
Overload protection with automatic reset
Inversions of polarity and short circuits protection
Heavy duty clamps

Features
Input Voltage (Volt 50-60Hz AC):	1 Ph x 230
Nominal battery voltage (Volt):	12 - 24
Power (KW):                                	1,3 - 13,5
Voltage limitation (Volt):             	14,8 (12V) - 29,6 (24V)
Average charging current (Amp):	40
Battery capacity (Ah min/max):	5 - 800
Battery types:                         	Pb: WET MF, AGM, Ca-Ca.
Effective charging current (Amp.MAX):	60
Charging positions (N°):          	STEPLESS
Boosting Current (Amp 0 Volt CC):	700
Boosting current (Amp 1 Volt / EL):	400 253165
(min. 1)
253166 Booster SC 80/900 1Ph 230/50-60 Out. 12-24V - Schuko plug Professional microprocessor-controlled battery charger and starter.
Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca
"Safe Charge & Boost": The system protects the electronic components on the vehicle against interference and overvoltage that may be created at the charging or quick starting procedures. (DIN 408399 interference emission level I).
Multi step charging- The batteries are charged by applying sophisticated multi-step programs.
Floating - Can remain connected to the battery for a long time. Batteries are ready to use at all times.
Continuously adjustable charge current.Lets you charge optimally batteries of all capacities (Ah).
Charging with timer
Boosting remote control
Digital Voltmeter / Ammeter
Overload protection with automatic reset
Inversions of polarity and short circuits protection
Heavy duty clamps

Features
Input Voltage (Volt 50-60Hz AC):	1 Ph x 230
Nominal battery voltage (Volt):	12 - 24
Power (KW):                                 	1,7 - 16,8
Voltage limitation (Volt):                   	14,8 (12V) - 29,6 (24V)
Average charging current (Amp):	50
Battery capacity (Ah min/max):	5 - 1000
Battery types:                                   	Pb: WET MF, AGM, Ca-Ca.
Effective charging current (Amp.MAX):	80
Charging positions (N°):                   	STEPLESS
Boosting Current (Amp 0 Volt CC):	900
Boosting current (Amp 1 Volt / EL):	500 253166
(min. 1)
CE860039 Cable - 1m - 50mm² - with red auxiliairy connector  CE860039
(min. 1)
CE860055 Cable - 'Easy Grip' - 0,5m - F600 and Moto clamp  CE860055
(min. 1)
CE860056 Cable - 'Easy Grip' - 0,5m - F650 and F600 clamp  CE860056
(min. 1)
252-030 Cable - tankbag Cable - tankbag

Low profile 90° angled entry with M14 threaded barrel and nylon nut (requires 9/16” / 14mm hole).
Custom seals for ROUND (e.g. Wunderlich) and OVAL (SW Motech) ‘crosshair’ power entries, and hard pannier wall.
External SAE 2-pin connector  with in-line waterproof seal for optional OptiMate cable adapter.
Internal SAE 2-pin connector / adapter for USB or other device. OptiMate30-a
252-030
O-30
(min. 1)
252005CLA Cable - with battery clips - KET Cable with battery clips - KET

Length : 6ft / 180cm
TM/KET 252005CLA
(min. 1)
252005DIN Cable - with DIN connection - KET Cable with DIN connection - KET

Length : 3ft / 180cm
TM/KET
5A max 252005DIN
(min. 1)
252005PL Cable - with DIN-plug - cigar lighter Cable - with DIN-plug - cigar lighter

Length : 20"/50cm
5A max
TM/KET
TM-72 252005PL
(min. 1)
252005EYDL Cable - with M6 eyelets - 15A fuse Cable - with M6 eyelets - 15A fuse

Length : 20" / 50cm
5A max
15A  /   M6
TM/KET 252005EYDL
(min. 1)
252105CLAMP Cable - with red and black pliers  252105CLAMP
252105CLAMP
320SC5E000
(min. 1)
252-004 Cable with battery clips Battery clips with ‘easy grip’ rubber handles, custom designed to fit round, square (power sport) and flat tab posts.

Length=20/50cm
Industry standard SAE 2-pin connector
Cable max. ratings: 10 Amp
-20°C/-4°F low temperature use OptiMate04-a
(min. 1)
252-100 Charger - USB - SAE connection Combination 2400mA USB charger and 3-LED battery monitor, with vehicle battery protection.

Vehicle battery protection: USB output turns off 3 hours after engine stopped or when vehicle battery charge level is less than 50%.
3 LED battery monitor (when USB output off)  – battery status is displayed every 5 seconds.
12V input through an industry standard SAE 2-pin connector.
5V 2400mA true output.
Unique seal and cap design for USB socket ; use any USB cable, seals when inserted.
Short circuit, overheat, over-voltage protection.

<iframe width="540" height="304" src="https://www.youtube.com/embed/kysaP9kjBXA" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> OptiMate100-a
(min. 1)