Electrical Vehicles (20 articles)
Prev[1]Next
Show: List Sort by:
IN616115 EV cable car plug type 1 - station plug - 5.00m - mode3 - 16a - 1phase JAZZY2GO charging cable with a Type 1 plug on the car side and a Type 2 plug (male) at the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped handgrip. 	 
The plugs are fitted with a rubber cap to protect against dirt and moisture.	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 
Characteristics	 	 	 	 	 	 	 	 	 
Type of cable 	 	TPE 	 	 	 	 	 	 	 
Cable	 	 	3 x 2,5mm2 (L1, Mass + N) and 1 x 0,5mm2 (CP)	 	 	 
 	 	 	Class V-O, non-flammable highest class	 	 	 	 
Plugs	 	 	In accordance with IEC 62196-1 and 62196-2	 	 	 	 
Max. capacity	 	3,7kW. Charging cable up to 20A / 250V  (20A max.)	 	 
Number of phases 	 	1	 	 	 	 	 	 	 
Safety class 	 	IP 44	 	 	 	 	 	 	 
Resistance	 	680 Ohm	 	 	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two 	 	 
microfiber gloves for cleaning and drying the cable and plug(s) after use.	 	 	 	 
A manual is provided in the carrier bag. Please read the instructions carefully before use.	 	 
 	 	 	 	 	 	 	 	 	 	 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations	 
in accordance with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a 	 
charging cable!	 	  IN616115
(min. 1)
IN616118 EV cable car plug type 1 - station plug - 8.00m - mode3 - 16a - 1phase JAZZY2GO charging cable with a type 1 plug on the side of the car and a plug type 2 (male) at the charging station.
The Type 2 plug is filled with a synthetic heat-dissipating resin and has an ergonomically shaped handle.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
TPE cable type
Cable 3 x 2,5mm2 (L1, Mass + N) and 1 x 0,5mm2 (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-1 and 62196-2
Max. 3.7kW capacity. Charging cable up to 20A / 250V (20A max.)
Number of phases 1
IP Security Class 44
Resistance 680 Ohm

This JAZZY2GO charging cable comes in a sturdy synthetic carrying bag, with two
Microfibre gloves for cleaning and drying the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations
in accordance with ISO 17409 and IEC 61851. Never use an extension cord with
charging cable! IN616115
(min. 1)
IN616118C EV coil cable car plug type1 – station plug – 8.00m – mode 16a – 1phase JAZZY2GO coil charging cable with a Type 1 plug on the car side and a Type 2 plug at the charging station.	 	The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped handgrip.	 	 	The plugs are fitted with a rubber cap to protect against dirt and moisture.	 	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 	 	Characteristics	 	 	 	 	 	 	 	 	 	 	 	 
Type of cable 	 	PUR	 	 	 	 	 	 	 	 	 	 Cable	 	 	3 x 2,5mm² (L1, Mass + N) and 1 x 0,5mm² (CP)	 	 	 	 	 	                                                Class V-O, non-flammable highest class 	 
	 	 	 	 	 
Plugs	 	 	In accordance with IEC 62196-2 and 61962-2	 	 	 	 	 	 
Max. capacity	 	3,7kW. Charging cable up to 20A / 250V 
	 	 	 	 	 
Number of phases 	 	1	 	 	 	 	 	 	 	 	 	 
Safety class 	 	IP44	 	 	 	 	 	 	 	 	 	 
Resistance	 	680 Ohm	 	 	 	 	 	 	 	 	 	 
 	 	 	 	 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves	 	 	 	 
for cleaning and drying the cable and plug(s) after use. 	 	 	 	 	 	 	 	 
A manual is provided in the carrier bag. Please read the instructions carefully before use.	 	 	 	 	 
 	 	 	 	 	 	 	 	 	 	 	 	 	 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance	 	 
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! 616118C
(min. 1)
IN616125 EV cable car plug type 2 – station plug - 5.00m – mode – 16a – 1phase JAZZY2GO coil charging cable with a Type 2 plug on the car side and a Type 2 plug on the charging station.
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped hand grips.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 3 x 2.5 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 3.7 kW. Charging cable up to 20A / 250V
Number of phases 1
Safety class IP44
Resistance 680 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN616128 EV cable car plug type 2 – station plug 8.00m mode3 16a 1phase JAZZY2GO cable de charge avec une fiche de type 2 du côté de la voiture et une fiche de type 2 de la station de charge.
Les bouchons de type 2 sont remplis de résine synthétique à dissipation thermique et sont dotés de poignées de forme ergonomique.
Les bouchons sont équipés d'un capuchon en caoutchouc pour protéger contre la saleté et l'humidité.
 
Les caractéristiques
Type de câble TPE
Câble 3 x 2,5mm² (L1, Masse + N) et 1 x 0,5mm² (CP)
 Classe V-O, classe la plus élevée ininflammable
Connecteurs conformes aux normes CEI 62196-2 et 61962-2
Max. capacité 3,7kW. Câble de charge jusqu'à 20A / 250V
Nombre de phases 1
Classe de sécurité IP44
Résistance 680 Ohm
 
Ce câble de charge JAZZY2GO est livré dans un solide sac de transport en plastique, avec deux gants en microfibre
pour nettoyer et sécher le câble et la (les) fiche (s) après utilisation.
Un manuel est fourni dans le sac de transport. Veuillez lire attentivement les instructions avant utilisation.
 
Les câbles de charge JAZZY2GO ne doivent être utilisés que pour recharger des voitures électriques (VE) aux stations de recharge de mode 3 conformément
avec la norme ISO 17409 et la norme CEI 61851. N'utilisez jamais de rallonge avec un câble de charge! IN616125
(min. 1)
IN616128C EV coil cable car plug type 2 – station plug 8.00m mode 16a 1phase JAZZY2GO coil charging cable with a Type 2 plug on the car side and a Type 2 plug at the charging station.
The Type 2 plugs are filled with a heat-spreading synthetic resin and have ergonomically shaped handles.
The plugs are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
PUR cable type
Cable 3 x 2.5 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
Class V-O, non-combustible highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 3.7 kW. Charging cable up to 20A / 250V
Number of phases 1
Protection class IP44
Resistance 680 ohms

This JAZZY2GO charging cable is supplied in a strong synthetic carrying case, together with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is included in the carrying case. Read the instructions carefully before use.

JAZZY2GO charging cables may only be used to charge electric cars (EVs) according to Mode 3 charging stations
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
IN616325 EV coil cable car plug type 2 – station plug 5.00m mode 16a 3phases JAZZY2GO coil charging cable with a type 2 plug on the side of the car and a type 2 plug from the charging station.
Type 2 caps are filled with synthetic heat-dissipating resin and feature ergonomically shaped handles.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
PUR cable type
Cable 5 x 2,5mm² (L1, L2, L3, Mass + N) and 1 x 0,5mm² (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-2 and 61962-2
Max. 11kW capacity. Charging cable up to 20A / 480V
Number of phases 3
Security class IP44
Resistance 680 Ohm
This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN616328 EV cable car plug type 2 – station plug 8.00m mode3 16a phases JAZZY2GO charging cable with a Type 2 plug on the car side and a Type 2 plug at the charging station. 	 	 
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped handgrips.	 	 	 The plugs are fitted with a rubber cap to protect against dirt and moisture.	 	 	 	 	 	 
Characteristics	 	 	 	 	 	 	 	 	 	 	 	 Type of cable 	 	TPE	 	 	 	 	 	 	 	 	 	 Cable	 	 	3 x 6,0mm² (L1, Mass + N) and 1 x 0,5mm² (CP)	 	 	 	 	 	 	 	 	Class V-O, non-flammable highest class 	 	 	 	 	 	 	
Plugs	 	 	In accordance with IEC 62196-2 and 61962-2	 	 	 	 	 	Max. capacity	 	7,4kW. Charging cable up to 32A / 250V 	 	 	 	 	 
Number of phases 	 	1	 	 	 	 	 	 	 	 	 	Safety class 	 	IP44	 	 	 	 	 	 	 	 	 	 Resistance	 	220 Ohm	 	 	 	 	 	 	 	 	 	 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves	 	 	for cleaning and drying the cable and plug(s) after use. 	 	 	 	 	 	 	 	
A manual is provided in the carrier bag. Please read the instructions carefully before use.	 	 	 	 	JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance	 	with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN616328C EV coil cable car plug type 2 – station plug 8.00m mode3 16a 3phases JAZZY2GO coil charging cable with a Type 2 plug on the side and a Type 2 plug at the charging station.
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped handgrips.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 3 x 2,5mm² (L1, Mass + N) and 1 x 0,5mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max. 3.7kW capacity. Charging cable up to 20A / 250V
Number of phases 1
Safety class IP44
Resistance 680 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
Charging Stations (EVs) to Mode 3 Charging Stations in Accordance
with the standard ISO 17409 and IEC standard 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
IN632115 EV cable car plug type 1 – station plug 5.00m mode3 32a 1phase JAZZY2GO charging cable with a type 1 plug on the side of the car and a type 2 plug from the charging station.
The Type 2 plug is filled with a synthetic heat-dissipating resin and has an ergonomically shaped handle.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
TPE cable type
Cable 3 x 6.0mm² (L1, Ground + N) and 1 x 0.5mm² (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-2 and 61962-2
Max. 7.4kW capacity. Charging cable up to 32A / 250V
Number of phases 1
Security class IP44
220 Ohm resistance

This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616115
(min. 1)
IN632118 EV cable car plug type 1 – station plug  8.00mm mode3 32a 1phase JAZZY2GO charging cable with a Type 1 plug on the car side and a Type 2 plug on the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped hand grip.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 3 x 6.0 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 7.4kW. Charging cable up to 32A / 250V
Number of phases 1
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! in616118
(min. 1)
IN632118C EV coil cable car plug type 1- station plug 8.00m mode 32a 1phase JAZZY2GO coil charging cable with a Type 1 plug on the car side and a Type 2 plug at the charging station.
The Type 2 plug is filled with a heat spreading synthetic resin and has an ergonomically shaped hand grip.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable PUR
Cable 3 x 6.0 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 7.4kW. Charging cable up to 32A / 250V
Number of phases 1
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! 616118C
(min. 1)
IN632125 EV cable car plug type 2 – station plug 5.00mm mode3 32a 1phase JAZZY2GO charging cable with a Type 2 plug on the side and a Type 2 plug at the charging station.
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped handgrips.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 5 x 2,5mm² (L1, L2, L3, Mass + N) in 1 x 0,5mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max. capacity 11kW. Charging cable up to 20A / 480V
Number of phases 3
Safety class IP44
Resistance 680 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
Charging Stations (EVs) to Mode 3 Charging Stations in Accordance
with the standard ISO 17409 and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN632128 EV prise de cable type 2 - prise de station 8.00mm mode3 32a 1phase JAZZY2GO charging cable with a Type 2 plug on the car side and a Type 2 plug at the charging station.
The Type 2 plugs are filled with a heat-spreading synthetic resin and have ergonomically shaped handles.
The plugs are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
TPE cable type
Cable 5 x 2.5 mm² (L1, L2, L3, Mass + N) and 1 x 0.5 mm² (CP)
Class V-O, non-combustible highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 11 kW. Charging cable up to 20A / 480V
Number of phases 3
Protection class IP44
Resistance 680 ohms

This JAZZY2GO charging cable is supplied in a strong synthetic carrying case, together with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is included in the carrying case. Read the instructions carefully before use.

JAZZY2GO charging cables may only be used to charge electric cars (EVs) according to Mode 3 charging stations
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN632128C EV coil cable car plug type2 – station plug 8.00m mode3 32a phase1 JAZZY2GO coil charging cable with a type 2 plug on the side of the car and a type 2 plug from the charging station.
Type 2 caps are filled with synthetic heat-dissipating resin and feature ergonomically shaped handles.
The caps are equipped with a rubber cap to protect against dirt and moisture.

Characteristics
PUR cable type
Cable 5 x 2,5mm² (L1, L2, L3, Mass + N) and 1 x 0,5mm² (CP)
Class V-O, highest class non-flammable
Connectors in accordance with IEC 62196-2 and 61962-2
Max. 11kW capacity. Charging cable up to 20A / 480V
Number of phases 3
Security class IP44
Resistance 680 Ohm
This JAZZY2GO charging cable comes in a sturdy plastic carrying bag, with two microfiber gloves
to clean and dry the cable and the plug (s) after use.
A manual is provided in the transport bag. Please read the instructions carefully before use.

JAZZY2GO charging cables should only be used to charge electric cars (EV) at Mode 3 charging stations in accordance with
with ISO 17409 and IEC 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
IN632325 EV cable car plug type 2 – station plug 5.00mm mode3 32a 3phases JAZZY2GO coil charging cable with a Type 2 plug on the car side and a Type 2 plug on the charging station.
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped hand grips.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable TPE
Cable 5 x 6.0 mm² (L1, L2, L3, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 22kW. Charging cable up to 32A / 480V
Number of phases 3
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616125
(min. 1)
IN632328 EV cable car plug type 2 – station plug 8.00mm mode3 32a 3 phases JAZZY2GO laadkabel met een Type 2-stekker aan de autozijde en een Type 2-stekker bij het laadstation.
De Type 2 pluggen zijn gevuld met een warmteverspreidende kunsthars en hebben ergonomisch gevormde handgrepen.
De pluggen zijn voorzien van een rubberen dop om te beschermen tegen vuil en vocht.
 
Kenmerken
Type kabel TPE
Kabel 5 x 2,5 mm² (L1, L2, L3, Mass + N) en 1 x 0,5 mm² (CP)
 Klasse V-O, niet-brandbare hoogste klasse
Stekkers In overeenstemming met IEC 62196-2 en 61962-2
Max. capaciteit 11kW. Laadkabel tot 20A / 480V
Aantal fasen 3
Veiligheidsklasse IP44
Weerstand 680 Ohm
 
Deze JAZZY2GO-oplaadkabel wordt geleverd in een sterke synthetische draagtas, samen met twee microfiber handschoenen
voor het reinigen en drogen van de kabel en stekker (s) na gebruik.
Een handleiding is meegeleverd in de draagtas. Lees voor gebruik de instructies aandachtig door.
 
JAZZY2GO-laadkabels mogen alleen worden gebruikt om elektrische auto's (EV's) volgens Mode 3-laadstations op te laden
met de ISO 17409-norm en IEC-norm 61851. Gebruik nooit een verlengsnoer met een oplaadkabel! IN616125
(min. 1)
IN632328C EV coil cable car plug type 2 – station plug  8.00m mode3 3phases  JAZZY2GO coil charging cable with a Type 2 plug on the car side and a Type 2 plug on the charging station.
The Type 2 plugs are filled with a heat spreading synthetic resin and have ergonomically shaped hand grips.
The plugs are fitted with a rubber cap to protect against dirt and moisture.
 
Characteristics
Type of cable PUR
Cable 3 x 6.0 mm² (L1, Mass + N) and 1 x 0.5 mm² (CP)
 Class V-O, non-flammable highest class
Plugs In accordance with IEC 62196-2 and 61962-2
Max capacity 7.4kW. Charging cable up to 32A / 250V
Number of phases 1
Safety class IP44
Resistance 220 Ohm
 
This JAZZY2GO charging cable comes in a strong synthetic carrier bag, along with two microfiber gloves
for cleaning and drying the cable and plug (s) after use.
A manual is provided in the carrier bag. Please read the instructions carefully before use.
 
JAZZY2GO charging cables must only be used to charge electric cars (EVs) to Mode 3 charging stations in accordance
with the ISO 17409 standard and IEC standard 61851. Never use an extension cord with a charging cable! IN616128C
(min. 1)
ZEEV2162 EV Charging Reel 3G2,5 + 1X0,5 - 3+1M - Single Fase 16A - Type 2 / Type 2  ZEEV2162
(min. 1)
ZEEV6162T EV Charging Reel 5G2,5 + 1X0,5 - 7+1 Meter - Triple Fase 16A - Wallside Type 2 / EV Charging Reel 5G2,5 + 1X0,5 - 7+1 Meter - Triple Fase 16A - Wallside Type 2 / Vehicleside Type 2
 ZEEV6162T
(min. 1)
Prev[1]Next